Author Topic: Sources for the kernel and toolchain  (Read 2465 times)

frankk

  • Newbie
  • *
  • Posts: 3
Sources for the kernel and toolchain
« on: 03:23:34 | 21 July, 2015 »
Hello
I need a source of kernel and toolchain to
modify the firmware of my LENCO IR-2100
__http://copper.reciva.com__  link does not work.
This radio is suitable for museum already?

Alan E Hill

  • Oh! That British Bloke ...
  • Administrator
  • Hero Member
  • *****
  • Posts: 2360
  • Country: gb
  • Thanked: 46 times
  • That British Bloke ...
    • Oh! That British Bloke ...
Re: Sources for the kernel and toolchain
« Reply #1 on: 04:15:52 | 21 July, 2015 »
Alan | That British Bloke Listening in Navarumsunk, NJ, USA, where all the women are strong, all the men good-looking, and all the children above average
Listening to LiquidLounge
Sangean WFR-20 / RCR-8 | Grace IR2600 | Alexa | Google Home
dumnonia.us

drgeoff

  • Hero Member
  • *****
  • Posts: 868
  • Thanked: 33 times
Re: Sources for the kernel and toolchain
« Reply #2 on: 10:10:44 | 21 July, 2015 »
Why are you trying to modify it?

frankk

  • Newbie
  • *
  • Posts: 3
Re: Sources for the kernel and toolchain
« Reply #3 on: 06:23:38 | 22 July, 2015 »
I want to avoid the situation which is now  -- namely Network Search "ending in restarting"
There is no opportunity to respond to key during start as the "factory settings"
Choosing this option from the menu to which you can not get
It is a misunderstanding

Paul Webster

  • Hero Member
  • *****
  • Posts: 461
  • Country: gb
  • Thanked: 17 times
Re: Sources for the kernel and toolchain
« Reply #4 on: 09:00:23 | 22 July, 2015 »
The sources that Reciva released do not include their application. So unless the problems that you see are really down to issues in the underlying OS then you might have to find another way to solve it.
Reciva-based Logik IR100 and Tangent Quattro MKII plus lots of Logitech (ex-Slimdevices) Squeezebox and 2 old Turtlebeach Audiotron, handful of O2 Jogglers and some Raspberry Pis

drgeoff

  • Hero Member
  • *****
  • Posts: 868
  • Thanked: 33 times
Re: Sources for the kernel and toolchain
« Reply #5 on: 09:46:35 | 22 July, 2015 »
I want to avoid the situation which is now  -- namely Network Search "ending in restarting"
There is no opportunity to respond to key during start as the "factory settings"
Choosing this option from the menu to which you can not get
It is a misunderstanding
1.  Have you ever had this radio working before?  If not, are you aware that it supports 802.11b or 802.11g and will not work with a WiFi AP which is set to 802.11n only?

2. If you have flashed the firmware which I emailed to you last week try resetting to factory defaults by the following procedure.  Unplug the power from the radio.  Wait 30 seconds.  Press and hold down the "Select" knob or button.  While keeping it pressed, reapply power.  Keep pressing "Select" until "Factory reset complete" (or similar words) appear on the display.  If that does not happen you have not flashed the firmware properly or your radio has a hardware fault.
« Last Edit: 09:52:11 | 22 July, 2015 by drgeoff »

frankk

  • Newbie
  • *
  • Posts: 3
Re: Sources for the kernel and toolchain
« Reply #6 on: 00:40:36 | 23 July, 2015 »
AAAA ... Your firmware responds to the "select" button while start the radio!
This is what I needed.
(All phones and tablets react to some button and pass mode "recovery" - is it shows you need)
After further re-flashing my radio inform about the result.
For now all thank you for the information and greet

 

anything