Author Topic: Auna Connect 150 - broken display - help  (Read 174 times)

kormoranmen

  • Newbie
  • *
  • Posts: 3
Auna Connect 150 - broken display - help
« on: 06:16:25 | 21 November, 2018 »
Hello everyone.

I have Auna Connect 150 device with broken display.
I now that it connected to mainboard with SPI interface. Display has number: KJ-BL2005CHC, it is 320x240 2.4" TFT display, more info on photo.

Do you have any information about this display (used controller, replacement etc?). Maybe someone has for sale? Maybe do you have datasheet of Venice 6.5 board?

Thank you in advance for the information.

Best regards.
« Last Edit: 06:25:20 | 21 November, 2018 by kormoranmen »

Dogmatix

  • Hero Member
  • *****
  • Posts: 1218
  • Country: de
  • Thanked: 61 times
Radios in use: Roberts Stream 93i, Sangean WFR-29C, Technisat 450 & 520, Revo Pixis RX, Hama DIT2010, IR110 & DIR3100.

kormoranmen

  • Newbie
  • *
  • Posts: 3
Re: Auna Connect 150 - broken display - help
« Reply #2 on: 23:10:58 | 21 November, 2018 »
Thanks. This brochure i found, but in this only notices to use SPI LCD interface, not specific controller. There is a lot TFT LCD controller so it don't help ;-)

Maybe do you have a similar Venice 6.5 service manual, not necessarily auna?

Dogmatix

  • Hero Member
  • *****
  • Posts: 1218
  • Country: de
  • Thanked: 61 times
Re: Auna Connect 150 - broken display - help
« Reply #3 on: 10:29:04 | 22 November, 2018 »
Maybe do you have a similar Venice 6.5 service manual, not necessarily auna?

Sorry, no. Service manuals and circuit diagrams for internet radios are hard to get.
Radios in use: Roberts Stream 93i, Sangean WFR-29C, Technisat 450 & 520, Revo Pixis RX, Hama DIT2010, IR110 & DIR3100.

kormoranmen

  • Newbie
  • *
  • Posts: 3
Re: Auna Connect 150 - broken display - help
« Reply #4 on: 10:54:44 | 22 November, 2018 »
I know. I spent last week to find any service manual but no success. Found Venice 6.2 service manual radio but pinout is different that venice 6.5. Maybe do you have only pinout for this venice module?

 

anything